PowerDsine PD-6548 User Manual download pdf (Page 14)

PD-6548

Power over Ethernet Solutions 14 Cat. No.: 06-6860-056

2.4 Connectors

The Midspan’s front panel includes a Console port (RJ-45 connector) that

supports two communication types:

1. Standard DTE Ethernet connector only at the web managable version

of the midspan. This connector is a standard 10/100BaseTX port that

is used for remote management of the device (see Table 2-3).

For connecting the port to a switch output, use a straight-through

ethernet cable. for connecting the port directly to a PC port, use a

crossed-over ethernet cable.

Table 2-3: Console Ethernet Connector

Pin # Label Description

1 TX+ Plus signal, transmit from midspan

2 TX- Minus signal, transmit from midspan

3 RX+ Plus signal, received to midspan

4 spare

5 spare

6 RX- Minus signal, received to midspan

7 spare

8 spare

2. Proprietary RS232 connector for console purposes: The user may

connect a terminal and perform software loading via the connector,

using the console cable included in the supplied kit.

The console port is set to 38,400-baud, 8 data bits, no parity and 1

stop bit. The RJ-45 connector of the cable should be connected to the

Midspan’s console terminal and the D-type 9 pin should be connected

to the PC. Pin connections for the D-type connector are as follows:

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

No comments

PowerDsine PD-6548 User Manual Page 14